Why GSA Encourages Use Of Revit And BIM For Projects

GSA is a major sales opportunity for most office furniture manufacturers.  Over the years, the organization has come closer to requiring BIM models for their projects.

Before we get lost in the world of acronyms, please remember that Revit is a "BIM" software.

Revit also has the largest market share of BIM software sales.  If it's easier to make sense of the following information about the GSA and BIM, you could swap out "BIM model" for "Revit model."

In 2003, the GSA (General Services Administration) established the National 3D-4D-BIM Program via the Public Buildings Service (PBS).

Since that time, through the Governance Board, there has been a strong collaboration between PBS and its sister organization the Public Buildings Information Technology Services (PB-ITS).

Across all PBS business lines, BIM is supported by the National 3D-4D-BIM Program.

Here is an older GSA video about BIM and why they like the process.  It's a bit dated, but the BIM concepts are still correct.

Why the GSA likes BIM

According to the GSA website, the GSA uses BIM to help their customers in design, construction, asset management, program requirements, and facility management.  BIM gives the organization the ability to simulate, coordinate, and visualize--all from BIM 3D, 4D models.

Not all 3D models are created equal.  Because a model is 3D does not mean that it is a BIM model. AutoCAD, for example, is not a BIM software.  BIM is more than just the geometric representation of the models used in BIM projects.

BIM models in projects

Including supplemental 2D and IFC BIM models, at all project milestones, the GSA often requires BIM deliverables.  All milestones, in these required BIM projects also must include open-standard facility management data.

As it stands now, the GSA requests 3D, 4D, and BIM technology as a solution to the data challenges faced during the project life cycle.  Although BIM is not yet 100% required, it is strongly encouraged by the organization.

The BIM "information" (product data--dimensions etc.) portion is important for optimizing, coordinating, keeping track of facility data, and simulating projects.

BIM, in the eyes of the GSA reduces re-formatting and re-gathering information and aids in project decisions.  The organization says that it is still looking into using BIM through the entire life cycle of a project.

In conclusion

Prepare yourself for a future where BIM models will be required to be considered for GSA projects. If you don't have them, your products won't be considered which is a missed sales opportunity.

Rendering: What You See Is What You Get

Render Image by Eduard Lefler

In the old days (less than 20 years ago!) designers, architects, and manufacturers used to rely on design sketches and pictures to help their clients understand their vision.  How did we survive before rendering?

For manufacturers, taking high quality images of their products in showrooms with set dressings was the only way to show new products in their true environment.

The cost was high to assemble furniture, find a suitable space, and hire a photographer for the shoot.  The furniture used often had to be sold at a discount as a "display" model.

Now, manufacturers create photo-realistic renders of their products in synthetic settings.  Their customers are also designing spaces with similar virtual products on their own platforms.

This is all great, and everyone is doing it, but what are the real benefits that renders offer?  How can dealers and manufacturers sell even more with render technology?

Dream faster in the cloud

Everything is moving faster and so are your customers.  Render technology is keeping up with business, but not everyone in business is moving faster.

Are you going overseas to create renders?  Many manufacturers go abroad and there are plenty of companies who create realistic renders in India and China, but that turnaround time is still not fast enough for time-crunched customers.

With new render cloud technology, you can render your designs in the web and not halfway around the world.  Make sure your design tool uses cloud render technology, so you can keep your sales momentum.

Speed is one of the most important elements that renders offer.  No physical products--everything is digital and your design teams across the country are creating professional photographic work on their own at a fraction of the cost.

Image by Fdecomite

Swap it out: quick

Think about how complex your products are.  Imagine showing your customer a finish library that has hundreds of options.

There was a time (and still today) where books filled with all of the variations of your products was the most efficient way to help your customer envision your product in a space.

The problem was, after the sixth book, your products turn into a heavy stack of cloth pasted in a binder.

Options, options, options.  Offer them quickly and at the touch of button in render software. Hundreds, and in many cases, thousands of options are digitized and ready to be applied to your render.

The faster the better.  You can send high quality render-able images off to your client before they decide to spend their money elsewhere.

Condensing your product offerings into a digitized state where the options you want to show are at your fingertips is the second most important way to increase sales with renders.

If the customer doesn't like something--change it, and know that you have thousands of options you can insert immediately.  This is the power of rendering to sell more.

Join us as we explore the world of rendering more in future posts, as ofcdesk adds this technology to their Connect tool.

5 Reasons Interior Designers Use Revit/BIM Software

Photo by Jakob Salovsky

For contract furniture manufacturers and dealers, understanding how their customers are using their products in a virtual space is becoming more and more important.

This post is a primer for members of the contract furniture industry to understand how their customers are interacting with their products in a BIM environment.

For those of you new to BIM, the acronym stands for Building Information Modeling. BIM is a streamlined, collaborative process used by architects, engineers, construction companies, and interior designers to efficiently plan and visualize buildings.  

Revit is a BIM software that works in this process.  In comparison, AutoCAD is not a BIM software.

In many cases interior designers may work with a manufacturer's products in a virtual space before even seeing the physical product.  

Designers may design a space using your task chair (provided you have Revit models available for them) before they've had the opportunity to sit in it.

This is the new reality for interior designers who collaborate simultaneously with other disciplines on BIM projects, the most popular BIM software being Autodesk Revit.

BIM has become an integral part of most large scale building projects and those who work with interiors have been in the process of making the switch for the past five years.

Here are 5 reasons that interior designers are making the transition to the BIM process using Revit:

1. Revit helps them visualize in 3D

BIM software, like Revit, helps designers create their space in 3D and then view that space. The ability to switch between 2D and 3D views helps the designers on both practical and creative levels.

In our interview with Linette Kilbourn, an interior designer working at Interior Architects, we learned the importance of BIM in the interiors space.  Linette told us:

"Personally, I feel that the (BIM) benefit for interior designers is even more than for architects.  First, we can immediately see the space in 3D, even right after the plan is drawn." 

For example, the concept of "clash detection," the ability to avoid errors when two objects are laid out in the same space, become more important. Designing in 3D makes inserting objects into a space as intuitive as placing a physical object in a room.

Revit designers use 3D Revit views to generate basic renders for their clients.  This is an opportunity for designers to impress and discuss their ideas for the layout for a given space within the building. 

It's in this phase that the designer showcases the furniture in the space, making it even more important for manufacturers to offer accurate Revit representations of their products.

Photo by stuart.childs

2. Data is easier to manage

There are a lot of 3D design tools on the market that the interiors community can use for free.  But the real power of BIM comes, not only in the ability to design in 3D, but in the easier management of all the data that can be used to plan the space.

Think of well made Revit/BIM models as little computer programs that hold data and options for manufacturers' products.  The bulk of the work that uses BIM models relies on product data and is not concerned with graphics.

Revit/BIM models often contain valuable data that assists with GSA and LEED requirements to be calculated for the space.

3. The Revit schedule helps them slice and dice data

Schedules provide an organized foundation for extracting and using BIM data as designers work through their projects.  If you're familiar with a Bill Of Material, schedules are a similar concept. Revit schedules provide an interface that could be compared to Microsoft Excel.

Revit designers use schedules to edit and view data in different ways.  For example, Room Data sheets are commonly created from schedules for an inventory of products which are added to the design.

Adding non-graphic data within the individual Revit symbols, enables interior designers to perform accurate quantity calculations in relation to surface areas and material amounts with ease.

Picture by GotCredit

4. BIM promotes collaboration

Furniture is just one aspect of a building project.  Interior designers involved with building projects are not only looking at their piece, they're collaborating in a virtual model that is simultaneously being worked on by other disciplines.

The days of passing architectural data from architect to engineer to construction and finally ending in the designers lap are fading fast.

BIM helps multiple disciplines work data for a building simultaneously.  That means engineers, MEP, electricians, and designers could theoretically still have their hands in a BIM model at the same time.

Creating in Revit helps designers capture and manage the design with multiple options such as space layout and material selection, within a single model, while communicating with their colleagues in other disciplines.

5. No fudging, accuracy is improved

With BIM/Revit there are fewer change orders as well as requests for information from the contractor and their subcontractors.

Revit doesn't let you fudge the numbers because its a 3D software.  In the old 2D software, dimensions can be overwritten, making the finished documents incorrect.

Revit doesn't let designers make up the numbers, and they appreciate the software for its accuracy and honesty.  In a BIM environment everything is as it appears, and if it is modeled incorrectly it will be caught in advance and fixed as soon as possible.


What have you heard about BIM technology for interior design?  Leave us comments below.

How To Clean Up Your Designs With Connect

Photo by Kathryn Hile

Dealers use ofcdesk Connect to translate their CAP 20/20 layouts from AutoCAD to Revit.  Little do they know that Connect can "clean up" CAP designs as well.

In this post I'll show you how you can use Connect to analyze your CAP layout to find improperly scaled items, doubled items, or anything else that will muck up your design.

These symbols may cause problems, as you work to quote your project or translate your design to Revit. Connect's "clean up" will also make sure that your layout is accurate and ensures your Bill Of Material is correct.

This cleaning process is useful because it confirms that your masterpiece design translates properly to Revit, so your client receives an accurate design.

As you see below, after you select your layout in AutoCAD, using the Connect plug-in, a  pop up window will appear; this is the "Translation Analysis Window."

The Translation Analysis Window is the "broom" that helps you clean up your design.

Our server compares your design against our database of millions of up-to-date symbols and finds any discrepancies between what you've created and what the manufacturer can deliver.

The Translation Analysis Window shows you where there are troublesome symbols.  The window will also give you tips and fixes on ways to improve your layout.

Use this window as a way to get up close and personal with the problematic models in your design. The window contains buttons for zooming in, marking, and visually isolating the poor or customized models that you've inserted into your project.

For example Lets look at the most common types of models you insert into your CAP design that could cause problems for your Bill Of Material or Revit translation.

1. Invalid Item

This is an item that our system doesn't recognize.  This is a rare occurrence, though you may enter an AutoCAD file that is improperly named, so the Connect system can't find it.

2. Non-Block Reference

Connect will tell you if an item in your layout is a non block reference.  Connect typically suggests ignoring these items, as they don't have any data worth using in your design.

3. Duplicated Item

Duplicated items can ruin your design and your Bill Of Material.  Connect will tell you if there are two items with the same product number in the same position.  Delete the extra one and move on.

4. Revit Not Available

This means that Connect has concluded that there is no Revit file for the product that you inserted into your layout.  Connect will classify this item as a "Special."  Stay tuned for ways to work with Specials in future posts.

Even if you don't need to translate your CAP layout to Revit, you can use this simple analysis tool to clean up your design and avoid inaccurate quotes.

After that, take the next step to sharing and visualizing your award-winning layout to win the project.

Learn more about ofcdesk Connect.

ofcdesk's Connect debuts at NeoCon 2015

ofcdesk partnered with National Office to spread the word about National’s new Revit® models and to launch ofcdesk’s new Connect software. The turnout in National’s bustling showroom was magnificent. 

Excited dealers and reps, who sell National products, learned that National is now making Revit® versions of their products available for Revit® designers. Visitors also viewed ofcdesk’s new AutoCAD®-to-Revit® translation tool Connect in action for the first time. 

The ofcdesk team demonstrated the process by showing a National Office layout in AutoCAD® and the simple steps it takes to translate that CAD layout to Revit®. 

7 Signs Dealers Need to Invest in Revit Technology

Contract manufacturers and commercial furniture dealers always ask us about the value of investing in Revit technology for their businesses.  The most common question is:  "Is Revit a fad?"

In other posts, we've proven time and time again that Revit technology in the commercial furniture industry is not a fad.  Your clients’ demand for Revit designs is only going to grow in the coming months.   

From conversations that we've had with our clients, I've compiled seven, clear signs that it's time to invest in Revit technology, if you're a dealer.  Read through the following list and ask yourself:  is this something I need to look at?

1. You received an RFP for a project that required you to provide your designs using Revit symbols.

This is the simplest reason to invest in Revit technology.  Your potential customers who have considered you for a project have decided to reach out to you for a chance to win their job.

Most importantly, they see your company as forward thinking enough to offer them the technology they need to help them with their project.  Don't let them down.

2. Your client has told you that they are using Revit.

Clients who use Revit might not always tell you.  This doesn't mean you can overlook the design tools they use.  Anytime you share designs with them they're going to put in more hours to take your design and bring it into their Revit projects.  This process can be taxing and time consuming for your client.

You'll add more work for them and not know it, as they may view you as a company who could not help them.

Ask your clients and see what design tools they use, and then, as you make the transition to Revit technology, you can be prepared to win them over with new capabilities.

3. You've never received a customer request for your designs in Revit... ever.

This is a problem.  If you've never received a request, beware.  This could mean one of two things:  your competitors are receiving those bigger Revit bids, or your clients don't think you have the ability to work with Revit technology.

Either way, there is an opportunity to help your client by understanding their design process, so that you are considered for Revit bids.

4. You're looking for new services to offer your clients.

Competition is high in the dealer world, so businesses are looking for new ways to stand out.  Enabling your business to offer Revit technology to your clients is a potential new revenue stream.

Provide ways you can save your clients' time with Revit designs in the beginning or during the project.  They may be willing to pay a little more, to give you some of their Revit work.

5. The manufacturers you represent have created Revit symbols.

The manufacturers you represent are just like you, businesses looking to increase profits.

If you find that the manufacturers you represent do offer Revit symbols, it's a good sign that they have researched to find that their customers are requesting Revit content from them.

6. You had to turn down a project because you didn't have the ability to offer Revit designs.

If the RFP or bid requires Revit designs and you don't have them, someone else is going to win the bid.  In our experiences, dealers are reactive and not proactive about responding to Revit bids.

Plan ahead and be ready to respond with confidence to those RFPs by having your Revit tools in line. 

7. The number of requests for your designs in Revit has increased in the last three months

When it comes to Revit technology for your business, it's important to assess the demand.  Is it the right time to invest in Revit technology?

You need to justify your investment in Revit technology.  The final and simplest answer to this question is:  If the number of Revit requests has increased in the last three to six months, it's time to invest in Revit technology.

The Revit tidal wave is coming, so prepare for the splash.

Ofcdesk uses new Autodesk technology to help contract furniture dealers speak the same language as their customers.

Chicago, IL (June 1, 2015) Ofcdesk llc, a member of the Autodesk Developer Network, released Ofcdesk Connect, a tool that translates 20/20 CAP Studio® designs to Autodesk Revit® designs, using new Autodesk cloud and web browser technology.

“We’d been hearing complaints for years about the disconnect between commercial office furniture dealers and designers using Revit®,” said Ofcdesk’s CEO, Mauricio Ritzmann, “so we decided to apply new Autodesk technology to make it easier for the two parties to share designs.”

Utilizing the new Autodesk technology, Ofcdesk developed Connect, a primarily web-based system that translates 20/20 CAP Studio® and AutoCAD® layouts to an equivalent native Revit® layout.  The user can view the final output in their web browser and email the Revit® file to their clients.

Ofcdesk’s new Connect software uses translation technology originally created for Ofcdesk IDC. The IDC plugin won Ofcdesk the Best of NeoCon Gold Award for Software Technologies in 2014.

While planning to sell the IDC plugin to the contract office furniture dealer market, Ofcdesk’s CTO, Fernando Malard, attended an exclusive cloud accelerator where Autodesk developers were invited to work together on their product ideas, using the new platform.

“This new technology helps Ofcdesk leverage all of IDC’s features in the cloud. By using the Autodesk Cloud API, Ofcdesk Connect will help dealers translate AutoCAD® designs to Revit®, collect information, and manage projects, all in a web browser,” Fernando said.

 “Because most of the Connect interface uses a web browser, we can offer a subscription model that means more price flexibility for dealers.” Ritzmann said.

A designer at a dealer can subscribe at connect.ofcdesk.com, download a simple plugin for AutoCAD®, select their CAP Studio® design, and upload it to the Connect web page, all for a minimal monthly fee.  From there, the Ofcdesk server will translate their CAP Studio® layout to the equivalent layout, using Revit® symbols.

Ritzmann added, “The Connect process makes it easy for a commercial office furniture dealer who doesn’t want a large upfront investment in Revit® technology, to be able to share their designs with their customers in a more cost effective way.”

Connect subscriptions are available at: http://connect.ofcdesk.com/

Interview: Dan Hughes Revit/BIM Marketer

We recently spoke to Dan Hughes from the Bradley Corporation.  

Dan is a prominent speaker, consultant, author, blogger, and expert in the world of Revit/BIM.  We chatted about how he has helped grow Bradley's brand by leveraging their Revit/BIM presence among the architectural community.  

Dan offers advice on ways that the contract furniture industry could learn from MEP manufacturers, when it comes to marketing BIM.

First, I'd like to hear your thoughts on how contract furniture manufacturers could use their knowledge of BIM and Revit symbols to better reach their customers?

 Realize that architects, engineers, contractors and facility owners have or
are evolving to use variations of BIM processes.

The BIM process works best when EVERYONE on the project team is using BIM, including vendors and suppliers.

 Federal and state projects had many of the first BIM mandates -- which
meant you couldn't use CAD if your organization was chosen.Those public BIM mandates evolved into private BIM mandates, for projects by the larger design and construction firms.

 Basically, CAD content would not be accepted if your firm was chosen for
these projects.

 In December 2012, the global construction firm Balfour Beatty was featured
in a construction magazine article.

 Balfour Beatty announced that over the next 12 months, they were going to
reduce their vender supply-chain by 1/3 --from 15,000 to 10,000 vendors.

 BIM was going to be the qualifier --to determine whether a vendor
organization would remain in the Balfour Beatty supply chain.

 I've seen projects that previously allowed Furniture, Fixture & Equipment
(FFE) suppliers provide their content to the project in 2D CAD -- forced
into a BIM mandate on those suppliers.

Deliver your work in a BIM or risk exclusion on the project.

 The facility owners can better manage their assets (FM) in a BIM
format...which demonstrates foresight by the contract furniture
manufacturer to partner into the Owner's BIM workflow for their facilities.

Download the 2012 McGraw-Hill  SmartMarket Survey| Business Value of BIM

A big concern that I hear from manufacturers is "Revit
may go away" or "Revit is a fad."  What are your thoughts on the staying
power of Revit?

 Here are a few  points that may dispel those concerns:

Software Standard: AutoCAD 1.x (1984) and Revit 4.0 (2002) were the first
Autodesk software versions I used.
 
Company Standard: Autodesk has been a solid partner to the AECO industry
since the mid-80s. I've been an Autodesk software user for 30 years. For 15
of those years, I sold, trained and supported their software with my
Autodesk Dealership.

 AutoCAD is still here -and Revit is now being packaged as a complete suite
(architecture, MEP, structure) with a strategy of becoming an all inclusive
cloud based application.

 Product Positioning: Strategically, Autodesk setup AutoCAD and Revit as 2 separate "platform" products --which means they could evolve and develop
applications around each software's unique strengths and processes.

 Just like AutoCAD, Revit now boasts dozens of 3rd party applications to
support its clients' unique applications.

 Revit LT (2013 & 2014), similar to AutoCAD LT success addresses the "Entry-level market". Revit LT will undoubtedly increase the training and use of Revit in the market. Autodesk provided an cross-grade option so users can cross-grade to a full license of Revit at a savings.

 In my opinion, the Revit LT user will rely more on "pre-built"
manufacturers Revit models to use their less expensive Revit. They want to
access a model and don't require all the high end features of a full Revit
license.

Higher Ed Programs: More than 100 architectural & engineering colleges \ universities have integrated Revit into their curriculum. Technical & junior colleges have done likewise.

Compare the LinkedIn architect, engineer and contractor "Help Wanted" --CAD vs Revit job postings on --- the majority are looking for Revit experience
as the qualifier for the job.

What are some ways that Bradley has used their Revit symbols and BIM experience to grow the Bradley brand?

 Our primary focus has been to deliver "everything Bradley" in a  digital
format. That would include Revit files, 3-Part-Specifications, CAD files,
Tech Data sheets, Revit material libraries, and tech support via bradleybim.com blog.

 So our BIM Initiative is not an island -but its integrated into Bradley's
manufacturing processes; while serving our clients' Revit-BIM workflow
processes.

 Our Revit library is available on the web in multiple locations and our
Reps provide flash drives to our clients at the local level.

What has been the reaction you've received from Bradley
customers since you've started providing Revit content?

 In 2012, we had 3 million Bradley Revit models downloaded --with 4.5
million downloaded so far in 2013.

 Our focus has been; create a reliable Revit model around consistent
standards; that a BIM \ VDC Manager could confidently place in their Revit
project.

I travel with our Bradley Reps on client visits and usually have 12-14
association (ASPE, AIA, CSI, AGC) BIM presentations nationally per year.

 These face-to-face client meetings, help us validate and adjust our
modeling - data processes to accommodate our clients needs.

 Our BradleyBIM.com blog greets 5,500-6,000 unique visitors per month. It
provides our clients  a transparent review of Bradley Revit modeling processes; that they can use for their internal Revit modeling processes.

 24/7/365 technical support for common customer service calls and to
contact our BIM Team.

 Short tutorials they can use personally or as Lunch & Learn material for
their staff.

 Bradley clients are pleasantly surprised when they review Bradley's level
of technical commitment --to serve as a partner in their Revit project
workflow.

 You have a great blog post where you've broken down the
value of having manufacturer supplied Revit symbols for an A+D firm, in cost
savings.

Could you explain briefly how you came to this
breakdown in cost savings for A+D firms?

 We've outlined Bradley's significant processes for correctly constructing a
Revit family on our Bradley BIM FAQs page.

 We've created a 1,000 Revit models and I've trained more than 130
professionals to assume the role of BIM \ VDC Manager within their
organizations.

We can validate the time + labor costs using the timeline to perform Revit Family Creation tasks, the salary calculations survey that Autodesk User Group International annually posts for a trained BIM \ VDC Manager.  An assumption that most BIM\VDC Managers already have pre-built,  time-saving templates and standards

 From that we can calculate the hourly costs to properly build a Revit
model.

 We've had clients share with us; that our cost number is a bit conservative
--their time + labor costs are much higher.

 
Dan Hughes joined the Bradley BIM Team in March 2010 as a part-time Revit BIM Consultant; to oversee the Revit family creation & quality control processes for the Bradley Revit Family Library. The library currently includes more than 1000 plumbing and specialty equipment Revit families representing tens of thousands of Bradley commercial toilet room products.  In May 2012, he joined Bradley Corporation full-time as the BIM Strategist serving Bradley Sales, Engineering, Marketing and Client Care departments.

Interview: Linette Kilbourn, Interior Designer using Revit



 

 

We recently chatted with interior designer Linette Kilbourn about Revit / BIM and how she uses Revit for her designs. She also gave advice for contract furniture manufacturers who are looking to offer their products in Revit.   

Linette has over 20 years experience in corporate interior design and has worked for top design firms including HOK, RHK Design, and Gensler.

How do you see Revit/BIM benefiting Interior Designers in A+D firms as a tool and a process?

 

Personally, I feel that the benefit for interior designers is even more than for architects.  First, we can immediately see the space in 3D, even right after the plan is drawn.  Secondly, we can import pre-created Revit families that substantially speeds up the design process.  And in addition, we can use the BIM feature to verify quantities in the CD phase. 

 

 

On a technical level, what challenges are you confronted with, as designer, if you don't have Revit/BIM symbols for your Revit projects?

Accurate Revit families are extremely important to ensure that the actual furniture can fit in the space well.  This is so important when laying out systems furniture.  If we do not have the Revit symbols from the manufacturer, we have to create them ourselves, which can cost us hours of lost time.

There is a reason why clients continually see the same furniture over and over again in every Revit rendering or wireframe.  There are thousands of Revit families of furniture out there, but they are very difficult to find and tedious to download.  

What sorts of things are designers at A+D firms doing if they don't have the appropriate Revit/BIM symbols for their projects?
 

We use whatever manufacturers product that is most similar.   Then if the client sees it in the 3D, they may prefer to use the other product.  This is not the ideal situation for designers, as we want them to love the furniture we have selected!
 

Where are designers in A+D firms going to find their Revit symbols?
 

Best if easily obtained on the internet, rather than a CD.  In general, most of our work is done on a PC, so apps are not that useful at this time.

 

How has the emergence of Revit/BIM changed the relationship between the contract furniture dealer and designer in A+D firms?

 

The problem we are running into is that most furniture dealerships are still using AutoCAD, or worse, their own proprietary programs.  This creates a huge problem when incorporating their data into our Revit files.  Often it is imported, and then becomes very cumbersome to change when the interior architecture changes.   In addition, the BIM properties are lost, so quantities cannot be checked by the designers.

A popular question that I get from manufacturers: at what phases in a design project are Revit symbols from contract furniture manufacturers used?

 

I use Revit from the very beginning of a project, therefore it is extremely important that I have access to the Revit families at this stage.  

 

What are some positive ways that you've seen contract furniture manufacturers embrace Revit/BIM?

These days, designers are more likely to select furniture from the internet, rather than the office library.   The best websites have the option to download furniture symbols while browsing each item. 

 

Any final thoughts or advice that you would like to share with the contract furniture industry about Revit/BIM?

 

Almost all firms are now standardized on Revit or are planning to in the future.  The best way to ensure your product will be used in projects is to provide easy access to the Revit families, so the product can be displayed accurately from the very beginning of the design stage.

 




Linette Kilbourn is Managing Director at KDR with over 20 years experience in corporate interior design.  She has most recently worked as a Designer at HOK, Managing Director at RHK Design in their Shanghai office,  and as a Senior Designer at Gensler.